Adhesives/Cleaners/Lubricants Items
< 1 2 … 14 15 16 17 18 19 20 21 22 >
representative of actual product.
Part #: 570-90923
Styrene - Open Web Trusses - Pratt Style pkg(2) -- 7/16 x 7"
$8.35
MSRP $8.35
representative of actual product.
$3.69
representative of actual product.
Part #: MMK-83181
Neolube No. 2 2oz Dry Film Conductive Lubricant
$18.95
MSRP $18.95
representative of actual product.
$6.40
MSRP $6.40
representative of actual product.
$4.60
MSRP $4.60
representative of actual product.
$7.80
MSRP $7.80

representative of actual product.
Quik-Cure 5 Minute Epoxy 4.5 oz.
Part #: BOB-201
Quik-Cure 5 Minute Epoxy 4.5 oz. QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.
$11.99
MSRP $11.99

representative of actual product.
Insta-Set CA Accelerator 8 oz.
Part #: BOB-152
Insta-Set CA Accelerator 8 oz. Refill. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
$11.99
MSRP $11.99

representative of actual product.
Glue Bottle Extender Tips 6/pk
Part #: BOB-301
Glue Bottle Extender Tips 6/pk. For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
$2.99
MSRP $2.99