Allied Manufacturing (Tix) Items



10 Results Found





Manufacturers
Categories
Scales
Tix Anti-Flux  8 oz.
Image displayed may not be
representative of actual product.


Tix Anti-Flux 8 oz.

Part #: 118-9

Allied Manufacturing (TIX) 


Adhesive -- Anti-Flux 8oz. - Fast-drying liquid inhibitor. Apply over area where solder is not wanted. Solder immediately after applying. Water soluble, may be washed or brushed off and used with any soft solder.

A Scale   |   Adhesives/Cleaners/Lubricants

$16.55


Tix Anti-Flux 1/2oz
Image displayed may not be
representative of actual product.


Tix Anti-Flux 1/2oz

Part #: 118-7

Allied Manufacturing (TIX) 


Adhesive - Anti-Flux -- 1/2oz 14.8mL. - Fast-drying liquid inhibitor. Apply over area where solder is not wanted. Solder immediately after applying. Water soluble, may be washed or brushed off and used with any soft solder.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.35

MSRP $3.35


Tix Flux for soldering - 2oz
Image displayed may not be
representative of actual product.


Tix Flux for soldering - 2oz

Part #: 118-4

Allied Manufacturing (TIX) 


Tix Flux 2oz. Works on most metals and alloys and may be used with any soft solder. Water soluble and will wash off after drying. If a possibility of corrosion exists, may be neutralized by a solution of bicarbonate of soda.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.25

MSRP $5.25


Tix Anti-Flux  16 oz.
Image displayed may not be
representative of actual product.


Tix Anti-Flux 16 oz.

Part #: 118-10

Allied Manufacturing (TIX) 


Adhesive -- Anti-Flux 16oz - Fast-drying liquid inhibitor. Apply over area where solder is not wanted. Solder immediately after applying. Water soluble, may be washed or brushed off and used with any soft solder.

A Scale   |   Adhesives/Cleaners/Lubricants

$26.55


Tix Flux for soldering - 1/2oz - 14.8ml
Image displayed may not be
representative of actual product.


Tix Flux for soldering - 1/2oz - 14.8ml

Part #: 118-3

Allied Manufacturing (TIX) 


Tix Flux 1/2oz 14.8ml, Works on most metals and alloys and may be used with any soft solder. Water soluble and will wash off after drying. If a possibility of corrosion exists, may be neutralized by a solution of bicarbonate of soda.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.35

MSRP $3.35


Tix Flux for soldering -   16oz - 473ml
Image displayed may not be
representative of actual product.


Tix Flux for soldering - 16oz - 473ml

Part #: 118-6

Allied Manufacturing (TIX) 


Adhesive - Tix Flux -- 16oz 473mL, Works on most metals and alloys and may be used with any soft solder. Water soluble and will wash off after drying. If a possibility of corrosion exists, may be neutralized by a solution of bicarbonate of soda.

A Scale   |   Adhesives/Cleaners/Lubricants

$26.55


Tix Flux - for soldering     8oz
Image displayed may not be
representative of actual product.


Tix Flux - for soldering 8oz

Part #: 118-5

Allied Manufacturing (TIX) 


Adhesive - Tix Flux -- 8oz 237mL. Works on most metals and alloys and may be used with any soft solder. Water soluble and will wash off after drying. If a possibility of corrosion exists, may be neutralized by a solution of bicarbonate of soda.

A Scale   |   Adhesives/Cleaners/Lubricants

$16.55


Solder 275 Melt/125Grains 20 pieces
Image displayed may not be
representative of actual product.


Solder 275 Melt/125Grains 20 pieces

Part #: 118-1

Allied Manufacturing (TIX) 


Tix Solder 275-Degree Melt -- 125 Grains, 20 Sticks - Indium-based solder melt at 275° F (150° lower than lead-tin solders, with a much higher wetting ability). Specific gravity is 8.6, while the bonding holding strength is 4,000lbs PSI. Will never tarnish; contains no silver or bismuth and will solder to platinum, golds, silver and numerous alloys. Solid-state components can be soldered without using a heat sink. Repairs to printed circuit boards are simple as the low melting point will not damage the board. use with any Flux, rosin, chloride or acid.

A Scale   |   Adhesives/Cleaners/Lubricants

$12.60

MSRP $12.60


Solder 275 Deg Melt/375 Grains 60 sticks
Image displayed may not be
representative of actual product.


Solder 275 Deg Melt/375 Grains 60 sticks

Part #: 118-2

Allied Manufacturing (TIX) 


Tix Solder 275 Degree Melt -- Approximately 375 Grains, 60 Sticks

A Scale   |   Adhesives/Cleaners/Lubricants

$35.90

MSRP $35.90


Tix Anti-Flux 2oz - 59.1ml
Image displayed may not be
representative of actual product.


Tix Anti-Flux 2oz - 59.1ml

Part #: 118-8

Allied Manufacturing (TIX) 


Adhesive -- Anti-Flux - 2oz 59.1mL. - Fast-drying liquid inhibitor. Apply over area where solder is not wanted. Solder immediately after applying. Water soluble, may be washed or brushed off and used with any soft solder.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.25

MSRP $5.25